Skip to content
← All guides
ButcherUpdated November 14, 2026· 10 min read

Opening a Butcher Shop in Ontario

Whether a butcher shop answers to the public health unit alone or also needs a provincial meat plant licence depends on what you do to the meat and who you sell it to. Here is where that line falls, what the health unit checks, and what the room has to be built for.

Reviewed by John Dogus, Founder & CEO

The short version

  • Cutting, boning, grinding, marinating and packaging inspected meat for your own customers keeps you outside Ontario's Meat regulation, as long as sales to other businesses stay at or under 25 per cent of your meat by weight or 20,000 kg a year, whichever is greater.
  • Curing, smoking, fermenting, drying or making ready-to-eat meat products is a different category of work, and it needs a provincial meat plant licence.
  • A retail butcher shop is a food premise. The health unit expects inspected meat only, cold holding at 4°C or lower, handwashing stations at the cutting area, and floors, walls and ceilings that clean properly.
  • Decide what you will make and who you will sell to before you design the room, because the answer changes the building, not just the paperwork.

A butcher shop looks like a small retail store and is regulated like a small food plant. Which of those it legally is depends on two things: what you do to the meat, and who you sell it to. Get that answer before you sign a lease, because it decides which authority licenses you, what the room has to be built for, and whether the space you are looking at can work at all.

This guide covers the retail side in Ontario: the line between a butcher shop and a meat plant, what the public health unit checks, and what the build involves. The permit sequence itself is the same as a restaurant’s, set out in restaurant permits in Ontario.

Retail butcher or meat plant: the line that decides everything

Ontario’s Meat regulation, O. Reg. 31/05 under the Food Safety and Quality Act, 2001, sorts the work done to meat into two categories.

What you do Category What it means
Aging or breaking carcasses; boning, cutting, grinding, marinating, slicing or tenderizing meat; pre-packaging it 1 Retail butcher work. Outside the Meat regulation while you stay within the wholesale limit below
Packaging meat for sale to other businesses 1 Allowed, but it counts toward the wholesale limit
Curing, smoking, fermenting, drying, emulsifying or canning meat 2 Meat plant work. Needs a provincial licence
Making ready-to-eat meat products (beyond cooking food to be eaten right away) 2 Meat plant work. Needs a provincial licence
Receiving, cutting, wrapping, freezing or grinding meat from farm-slaughtered animals 2 Meat plant work. Needs a provincial licence

The wholesale limit. A business that does only Category 1 work is outside the regulation if, in its last fiscal year, its sales to anyone other than consumers (restaurants, other stores, caterers) did not exceed the greater of 25 per cent of its meat products by weight, or 20,000 kg. A new business applies the same test to what it expects to sell in its first year. “The greater of” matters for a small shop: one selling 40,000 kg a year can sell up to 20,000 kg to other businesses, not just a quarter of it.

The meal exception. A business that is both a butcher and a food service premise is outside the Meat regulation if most of its sales are meals or meal portions for immediate consumption, measured by dollar value or by the weight of meat sold. A butcher counter inside a busy hot-food business can fall here. A butcher shop with a small sandwich counter does not.

Over the line. Doing any Category 2 work, or wholesaling past the limit, makes the business a freestanding meat plant. Section 4 of the Food Safety and Quality Act, 2001 then requires a licence before you operate, and the regulation brings its own requirements for the premises, equipment and water; a licence can be refused if those are not in place, and the application can require the plant’s drinking water to be tested. That is a different project, with a different budget, and it is far easier to plan for at the start than to retrofit.

Selling meat products into another province or exporting them takes you into federal rules under the Safe Food for Canadians Act. Ontario’s regulation steps back where a federal licence covers the work. If that is part of the plan, raise it before design.

If you stay retail: what the health unit checks

A retail butcher shop is a food premise under the Health Protection and Promotion Act and O. Reg. 493/17 (Food Premises). You give notice to the local medical officer of health before you open, and the public health unit reviews and inspects the premises. The points that matter most for meat:

Inspected meat only. The only meat allowed on the premises is meat from animals inspected and approved under the provincial Meat regulation or federal inspection, stamped or labelled to show it (s. 38 (1)). Your suppliers are part of your compliance.

Cold holding. Potentially hazardous food, which raw meat is, has to be held at an internal temperature of 4°C or lower, or 60°C or higher (s. 27). Food sold frozen stays frozen until it is sold or prepared (s. 28). The premises must have refrigerated space adequate to store it safely (s. 7 (3) (d)).

Handwashing. There must be an adequate number of handwashing stations, kept supplied and placed where the people handling food can reach them conveniently (s. 7 (3) (c)). They are for staff handwashing only (s. 7 (4)), which in practice means one at the cutting area, not a trip to the washroom or a prep sink doing double duty.

Surfaces. Floors where food is prepared, packaged, handled or displayed, and where utensils are cleaned, must be tight, smooth and non-absorbent, and walls and ceilings must be easy to clean (s. 7 (1) (c), (d)). A cutting room gets washed down daily; finish it for that.

Bought-in cured and smoked products. A manufactured meat product (cured, smoked, dried, fermented, or otherwise ready to eat without further cooking) sold at your counter must carry a tag, stamp or label identifying the plant it came from (s. 37). Keep the paperwork that shows it.

Hunters’ game. A premise that sells meat, other than a food service premise, may custom-cut, wrap and freeze a hunter’s game for its owner, if the game never touches inspected meat, each quarter or larger piece is tagged with the owner’s name and address, and each primal cut area is marked “Consumer Owned, Not for Sale” in edible ink, in letters at least 1.25 cm high (s. 38 (2)). Plan separate cold storage if you intend to offer it, and note that a shop which also serves meals cannot.

If you also serve food. Add a hot table, sandwiches or prepared meals and the shop is also a food service premise. That brings in the rule that at least one food handler or supervisor who has completed food handler training is on the premises every hour it is open (s. 32), and usually a kitchen with its own ventilation.

What the room has to be built for

A cutting room separate from the sales floor. Raw product moves from receiving to the cooler, to the cutting room, to the case, without crossing customer space or the washrooms. That flow is easier to design than to fix, and it is what the layout guide is about.

Cold storage. Most butcher shops need at least one walk-in cooler, often a freezer, and display cases that hold product at temperature through a busy afternoon. Size the walk-in for delivery day, not an average day; sizing a walk-in covers how, and you can draw the box and get it quoted in our equipment partner Norpex’s walk-in builder.

Drains and grease. A cutting room that is washed down needs floor drains, and meat trim and fat in the wash water put the shop under the municipal sewer-use by-law. The Building Code requires a grease interceptor wherever a fixture discharges fats, oils or grease in an area where food is processed or prepared, and the by-law then governs how it is maintained (grease interceptor requirements in Ontario).

Power. Band saws, grinders, slicers, vacuum packers and refrigeration all draw power at once, and some heavier equipment runs on three-phase. Confirm the unit’s electrical service before you commit; power and gas explains what to ask for.

Washing up. Knives, grinder plates, trays and lugs need a dish area that can sanitize them properly. The dish area guide sets out sinks, machines and hot water.

Waste. Bones, fat and trim need cold, sealed storage and a collection arrangement. Odour and pests are a lease problem as much as a health one.

Scales. A scale used to sell by weight must be an approved type and certified by an inspector before it is used in trade (Weights and Measures Act, s. 8). Buy accordingly, and keep the certification.

Change of use. A unit that was not previously a food business can need a building permit for the change of use even with little construction, which brings occupant load, washrooms and barrier-free access into scope. Choosing a space covers what to check before you sign.

Inside a grocery store

A butcher department in a grocery store is the same work under the same rules, with one more interface: the meat room shares receiving, refrigeration and waste with the rest of the store. Decide it before the grocery design starts, not after. Opening a grocery store in Ontario covers the rest of that project.

The order that works

  1. Decide the business model. Fresh cutting only, or curing and smoking too? Retail only, or wholesale to restaurants, and how much? Those answers settle whether you are a food premise or a meat plant.
  2. Check the space against it. Zoning for the use, electrical service, drainage, room for a separate cutting area and cold storage, and a loading door that suits deliveries.
  3. Design the room around the product flow, the cold chain and wash-down.
  4. Run the building permit and the public health review side by side, as on any food project. Add the meat plant licence application if you are over the line.
  5. Order the long-lead equipment early. Walk-ins, cases and refrigeration are rarely in stock.
  6. Pass the inspections, then open.

Sources

Common questions

Do I need a licence to open a butcher shop in Ontario?

Not a provincial meat plant licence if you only do what Ontario's Meat regulation (O. Reg. 31/05) calls Category 1 work, such as cutting, boning, grinding, marinating and packaging inspected meat, and your sales to other businesses stay at or under 25 per cent of your meat by weight or 20,000 kg a year, whichever is greater. The shop is then a food premise: you give notice to the local medical officer of health before opening and the public health unit inspects it. Your city may also require a business licence.

Can a butcher shop sell meat to restaurants in Ontario?

Yes, within a limit. A shop doing only Category 1 work stays outside the Meat regulation while its sales to anyone other than consumers do not exceed the greater of 25 per cent of its meat products by weight or 20,000 kg in the year. Past that, it needs a meat plant licence under the Food Safety and Quality Act, 2001.

Can I cure or smoke meat in a retail butcher shop?

Curing, smoking, fermenting, drying, emulsifying and canning meat, and making ready-to-eat meat products, are Category 2 activities under O. Reg. 31/05, and a business doing them needs a provincial meat plant licence. The main exception for a shop is a business whose sales are mostly prepared meals for immediate consumption, measured by dollar value or by meat weight.

What temperature does meat have to be kept at in an Ontario butcher shop?

The Food Premises regulation (O. Reg. 493/17, s. 27) requires potentially hazardous food, which includes raw meat, to be held at an internal temperature of 4°C or lower, or 60°C or higher. Food sold frozen must be kept frozen until it is sold or prepared (s. 28).

Can a butcher shop cut and wrap a hunter's deer?

Yes, unless the shop is also a food service premise. A premise that sells meat may custom-cut, wrap and freeze hunted game for its owner if it never touches inspected meat, each quarter or larger piece carries a tag with the owner's name and address, and each primal cut area is marked "Consumer Owned, Not for Sale" in edible ink, in letters at least 1.25 cm high (O. Reg. 493/17, s. 38 (2)).

Free consultation

Want this applied to your actual space?

Bring the unit, the lease or just the concept. You will get a project review, a realistic timeline and a preliminary cost breakdown — at no cost, and an honest answer if it does not work as scoped.

Start Your Project

Free Consultation

Tell us what you want to build.

The first consultation is free. You get a project review, a realistic timeline and a preliminary cost breakdown — including an honest answer if the project does not work as scoped.

Mon – Fri, 9:00 a.m. – 5:00 p.m. · No obligation

Call usStart your project